地震应急指挥中心可视化中控系统的设计与实现     

林向洋  文鑫涛  高小跃  甄盟  郑通彦 《地震地磁观测与研究》2020,41(4):225-231

介绍地震应急指挥中心中控系统的建设情况，阐述了可视化智能中控系统的功能需求、逻辑结构和应用框架结构，分析了可视化智能中控系统的功能特点，并对中控系统的技术发展和应用进行展望。  相似文献   

海拉尔—塔木察格盆地中部富油凹陷高含凝灰质碎屑岩储层成因及油气勘探意义     

蒙启安  李军辉  李跃  邹越 《吉林大学学报(地球科学版)》2020,50(2):569-578

海拉尔—塔木察格盆地中部富油凹陷下白垩统铜钵庙组和南屯组广泛发育高含凝灰质碎屑岩储层，并已于其中获得了工业突破，但对其成因机制认识不清。在岩心、薄片、录井和测井等资料综合研究的基础上，结合大量海拉尔—塔木察格盆地及周边地区的火山事件分析，认为中部富油凹陷发育的高含凝灰质碎屑岩的岩石类型主要包括凝灰质砂岩、凝灰质泥岩、凝灰岩和沉凝灰岩。不同时期、不同凹陷高含凝灰质碎屑岩储层发育特点各异，整体来看从铜钵庙组到南屯组储层中的凝灰质含量越来越低，高含凝灰质碎屑岩储层主要发育在铜钵庙组和南一段沉积时期。高含凝灰质碎屑岩储层中的火山物质并非来源于自身断陷期发生的基性火山活动，而是来自于大兴安岭地区大规模的酸性火山喷发事件。海拉尔—塔木察格盆地高含凝灰质碎屑岩储层的成因机制包括两种类型：一种是同沉积期火山灰直接空降入湖型；另一种是同沉积期火山灰先沉降至陆上经河流搬运后再沉积的水携型。高含凝灰质碎屑岩储层中的火山碎屑物质受有机酸作用易于溶蚀，次生孔隙发育，为深部油气成藏提供了有效储层空间，并且火山喷发活动对优质烃源岩的形成具有促进作用，对于油气勘探具有重要意义。  相似文献   

山东莱芜盆地碳酸盐岩热液溶蚀特征及水文地质意义   总被引：1，自引：0，他引：1  

刘元晴  周乐  李伟  王新峰  马雪梅  吕琳  邓启军  陈晨 《现代地质》2020,34(1):199-206

鲁中山区莱芜盆地在燕山期发生大规模岩浆侵入活动,岩浆岩体外围碳酸盐岩区分布有水源地、富水块段等岩溶发育富水区,且靠近岩体含水层多发生大理岩化。富含CO₂、H₂S等酸性成分的岩浆热液流体,能对碳酸盐岩产生明显的溶蚀作用。基于岩石样品化学组分分析、水文地质调查及数据统计分析、热液溶蚀地质点详细观测,构建热液溶蚀模式,对莱芜盆地及外围热液溶蚀特征及机理进行研究。结果表明:高温高压岩浆侵入使得接触带碳酸盐岩发生热液变质大理岩化;沿渗透性断裂、裂缝以及不整合面等运移的热液流体,对碳酸盐岩地层产生酸性热液溶蚀和混合溶蚀作用,形成不同规模溶蚀孔洞,构成地下水富集空间,为寻找城镇地下水后备水源地提供新方向。  相似文献   

Study on the Moment Magnitude of Small and Moderate Earthquakes Located in the Inner Mongolia Region     

Liu Fang  Zhang Fan  Li Bin  Na Re 《中国地震研究》2018,32(1):53-63

Based on digital seismic waveform data from Inner Mongolia Digital Seismic Network, the source spectrum parameters of 182 small and moderate earthquakes from January, 2009 to September, 2016 are derived, and the seismic moment M₀ and moment magnitude M_W of the earthquakes are calculated. The M_L-M_W relationship and the relationship between stress drop and magnitude are obtained using the linear regression method. It is clear that incorporating the moment magnitude into the seismic quick report catalog and the official earthquake catalog can enrich earthquake observation report content, thus providing better service for earthquake emergency and earthquake scientific research.  相似文献   

Fault geometrical model of Dujiangyan section in Longmenshan fault zone          下载免费PDF全文

Hu-Rong Duan  Sheng-Lei Chen  Run Li  Quan-Chao Yan 《地震科学（英文版）》2018,31(3):126-136

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.  相似文献   

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*          下载免费PDF全文

Yuyang Tan  Haijiang Zhang  Junlun Li  Chen Yin  Furong Wu 《地震科学（英文版）》2020,33(4):177-193

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.  相似文献   

2013年南斯科舍海岭M_W7.8地震的多点震源机制反演          下载免费PDF全文

张喆  许力生 《地球物理学报》2020,63(8):2978-2998

2013年11月17日，在南极南奥克尼群岛北、南极板块与斯科舍板块之间发生了一次M_W7.8级地震（2013年南斯科舍海岭M_W7.8地震），我们利用全球分布的长周期和宽频带地震记录反演确定了这次地震随时间和空间变化的震源机制，验证了提出的一种多点震源机制反演的新方法.首先利用长周期记录的W震相反演了这次地震的矩心矩张量解并利用体波提取了视震源时间函数，同时利用台阵反投影技术从宽频带记录中获得了这次地震的高频源的时空分布，然后基于矩心矩张量解、视震源时间函数以及高频源的时空分布，实现了采用新方法对2013年南斯科舍海岭M_W7.8地震的多点震源机制反演.矩心矩张量解表明，地震矩心在44.50°W/60.18°S，矩心深度19 km，半持续时间49 s，释放标量地震矩4.71×10²⁰ N·m，发震断层走向104°，倾角54°，滑动角8°.视震源时间函数清楚地揭示了地震矩随时间变化的方位依赖性，总体上可以将时间过程分为前60 s和后50 s两个阶段，但前60 s可细分为两次子事件.根据台阵反投影结果，这次地震为沿海沟从西到东的单侧破裂，破裂长度达311 km，可以分为5次子事件，能量释放的峰值点依次为13 s、30 s、51 s、64 s和84 s，平均破裂速度分别为0.6 km·s^-1、2.6 km·s^-1、2.3 km·s^-1、2.8 km·s^-1和3 km·s^-1.多点震源机制反演显示，5次子事件的矩震级分别为M_W7.57，M_W7.48，M_W6.80，M_W7.53和M_W7.08，半持续时间依次为21 s，17 s，6 s，16 s和8 s，走向分别为95°，105°，81°，98°和98°，倾角依次为57°，49°，86°，46°和64°，滑动角-9°，1°，-17°，13°和-4°.这些在震源机制、能量释放以及持续时间方面的变化都是当地构造和应力环境复杂性的反映.  相似文献   

Northward cooling of the Kuncha nappe and downward heating of the Lesser Himalayan autochthon distributed to the south of Mt. Annapurna,western central Nepal     

Toru Nakajima  Harutaka Sakai  Hideki Iwano  Tohru Danhara  Takafumi Hirata 《Island Arc》2020,29(1)

We investigated the tectonothermal history of the Lesser Himalayan sediments (LHS), which are tectonically overlain by the Higher Himalayan Crystalline. Fission‐track dating and the track length measurement of detrital zircons obtained from the Kuncha nappe and the Lesser Himalayan autochthonous sediments in western central Nepal revealed northward cooling of the nappe and possible downward heating of the autochthon by the overlying hot nappe. Nine zircon fission‐track (ZFT) ages of the nappe showed northward‐younging linear distribution from 11.6 Ma in the front at Tamghas, 6 Ma in the central at Naudanda, and 1.6 Ma in the northernmost point at Tatopani. Thermochronological invert calculation of the ZFT length elucidated that the Kuncha nappe gradually cooled down (30 °C/Myr) at the front and rapidly cooled down (120 °C/Myr) at the root zone. In contrast, the ZFT age of the Chappani Formation, located just beneath the Kuncha nappe in the central part, demonstrated a totally reset age of 6.8 Ma, whereas the Virkot Formation, structurally far from the nappe, yielded a partially reset age of 457.3 Ma. This suggests that the LHS underwent downward heating, resulting in a thermal print on the upper part of the LHS; however, the thermal effect was not sufficient to anneal ZFT totally in the deeper part. Presently, the nappe cover is eroded and denuded from this area. Detrital zircons from the Chappani Formation in Tansen area to the south of the Bari Gad Fault did not show any evidence of annealing, suggesting that nappe never covered the LHS distributed to the south of the fault.  相似文献   

基于分布式控制力矩陀螺的水下航行器轨迹跟踪控制   总被引：2，自引：0，他引：2  

黄道敏  徐瑞昆  唐国元  冯雷  刘智  徐国华 《海洋工程》2018,36(6):69-76

基于控制力矩陀螺群(CMGs)的水下航行器具有低速或零速机动的能力。采用基于分布式CMGs的水下航行器方案,并研究其水平面的轨迹跟踪控制问题。通过全局微分同胚变换将非完全对称的动力学模型解耦成标准欠驱动控制模型,并根据简化的模型构建其轨迹跟踪的误差动力学模型,将轨迹跟踪控制问题转化为误差模型镇定问题。基于一种分流神经元模型和反步法设计了系统的轨迹跟踪控制律,该控制器不需要对任何虚拟控制输入进行求导计算,且能确保跟踪误差的最终一致有界性。仿真结果表明该控制器能够实现在不依赖动力学参数先验知识的情况下对光滑轨迹的有效跟踪。  相似文献   

基于圆柱多段拟合的隧道中轴线提取方法研究     

荆海峰  李广云  王力  杨文锋 《大地测量与地球动力学》2018,38(2):211-215

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理，并将点云按隧道走向分成不同区段；然后对各区段依据轴线与表面点云法线垂直关系，提取精度较低的中轴线；最后对各区段利用圆柱多段拟合，提取精度较高的中轴线。实验表明，隧道中轴线的提取在一定的采样区间具有较高的稳定性，对直线和弯曲的圆形隧道有良好的适用性，算法可靠，精度较高。  相似文献